How does the metering section of an extruder screw work?
As a supplier of extruder screws, I've had the privilege of delving deep into the intricacies of these remarkable components. Among the various sections of an extruder screw, the metering section plays a pivotal role in ensuring the efficient and consistent production of high - quality extruded products.


The extruder screw is typically divided into three main sections: the feed section, the compression section, and the metering section. The metering section is the final part of the screw before the material exits the die. Its primary function is to pump the molten plastic at a constant rate and pressure to the die, ensuring a uniform output.
The Physical Structure of the Metering Section
The metering section has a relatively constant depth and pitch. The constant depth is crucial because it allows for a stable flow of the molten polymer. Unlike the compression section where the depth decreases to compress the material, the metering section maintains a consistent depth to provide a steady flow. The pitch, which is the distance between two consecutive flights of the screw, is also kept constant. This uniformity in the physical structure of the metering section helps in creating a predictable flow pattern for the molten plastic.
Flow of Material in the Metering Section
When the molten plastic enters the metering section, it is already in a fully melted state. The rotation of the screw imparts a forward motion to the material. The material moves along the screw channel in a combination of drag flow and pressure flow.
Drag flow is the movement of the polymer due to the rotation of the screw. As the screw rotates, it drags the molten plastic along the screw channel. This is similar to how a conveyor belt moves objects forward. The drag flow is proportional to the rotational speed of the screw and the channel depth.
Pressure flow, on the other hand, is the movement of the polymer caused by the pressure difference between the metering section and the die. The pressure builds up as the material is pushed towards the die. The pressure flow is affected by the viscosity of the polymer, the channel geometry, and the resistance at the die.
In an ideal situation, the drag flow and pressure flow work together to ensure a smooth and continuous flow of the molten plastic. If the drag flow is too high compared to the pressure flow, the material may flow too quickly, leading to inconsistent output. Conversely, if the pressure flow is dominant, it may cause back - flow and reduce the efficiency of the extrusion process.
Temperature and Viscosity Control in the Metering Section
Temperature plays a crucial role in the metering section. The temperature of the molten plastic affects its viscosity. A higher temperature generally results in a lower viscosity, which means the plastic flows more easily. In the metering section, it is essential to maintain a consistent temperature to ensure a constant viscosity. This is achieved through the use of heating and cooling systems.
Most extruders are equipped with heaters and coolers along the barrel. The heaters are used to raise the temperature of the plastic to the desired melting point, while the coolers are used to maintain the temperature within a narrow range in the metering section. By controlling the temperature, we can control the viscosity of the molten plastic, which in turn affects the flow rate and the quality of the extruded product.
Importance of the Metering Section in Extrusion Quality
The metering section is directly responsible for the quality of the extruded product. A well - designed metering section ensures a uniform flow of the molten plastic, which results in a consistent cross - section of the extruded product. If the flow is not uniform, it can lead to defects such as uneven thickness, surface roughness, and inconsistent mechanical properties.
For example, in the production of plastic pipes, a non - uniform flow in the metering section can cause the pipe to have different wall thicknesses at different points. This can weaken the pipe and make it more prone to failure. In the case of plastic films, uneven flow can result in a wavy or wrinkled surface, which is unacceptable for most applications.
Our Extruder Screw Offerings
As a supplier of extruder screws, we offer a wide range of products to meet the diverse needs of our customers. Our Bimetallic Extruder Screw is designed to provide excellent wear resistance and corrosion resistance. The bimetallic construction combines the strength of a base material with the high - performance properties of a cladding material, ensuring a long service life even in harsh operating conditions.
Our Plastic Extruder Screw is specifically designed for the extrusion of various types of plastics. It is engineered to optimize the flow of the plastic in the metering section, ensuring a consistent output and high - quality extruded products.
We also offer Plastic Extruder single screw and barrel which are suitable for a variety of extrusion processes. The single screw design provides a simple and efficient solution for many applications, while the barrel is designed to work in harmony with the screw to ensure optimal performance.
Contact Us for Your Extruder Screw Needs
If you are in the market for high - quality extruder screws, we invite you to contact us. Our team of experts is ready to assist you in selecting the right screw for your specific application. We can provide customized solutions based on your requirements, ensuring that you get the best performance and value for your investment. Whether you are a small - scale manufacturer or a large - scale industrial operation, we have the expertise and products to meet your needs.
References
- Tadmor, Z., & Gogos, C. G. (2006). Principles of Polymer Processing. Wiley - Interscience.
- Rauwendaal, C. (2014). Polymer Extrusion. Hanser Publishers.






